As an Amazon Associate I earn from qualifying purchases.1. Vipxyc
Vipxyc 2 Port NGFF/M.2 B + M Key to PCI-E 4X Adapter Card SSD SATA to PCI Express PCI-E,Easy installation & no driver required
Vipxyc - Supports 2230, 2242, 2260, 2280, 22110 size ngff ssd. Pci-e power supply. One ngff b key and one ngff m key sockets available. Calorific value small, more convenient to use.
Compliant with pci Express M. 2 specification 1. 0 Connect one b key & one m key ngff ssd to pci-e 4x motherboard at the same time. Supports sata-based b key and pci-e 4x-based m key ngff ssd. Easy installation & no driver required. Compliant with SATA 3. 0 specification for B key.
Compliant with PCI-E 4X 3. 0 specification for M key. No additional power required. Supports data transfe. Adopting 12v + 3. 3v dual voltage, faster, with lED status indicator, more stable than a single voltage, can effectively reduce the SSD temperature.8 screw holes 2230/2242/2260/2280/22110 available to fix NGFF SSD cards. Support boot function. Supports any os, like windows, WinCE, Mac & Linux etc.
| Brand | Vipxyc |
| Manufacturer | Vipxyc |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.12 kg (0.27 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Vipxyczgkcoexd1t |
2. Cmstop
M.2 NVMe SSD to PCI-E 3.0 X1 X4 Adapter Card M Key Interface Card Desktop Hard Disk Adapter for 2230 2240 2260 2280 SSD M2
Cmstop - Easy to install, no driver is required. Integrated btbcOIN high-speed signal enhancement technology. Not stuck, the motherboard self-test does not delay. With large capacity tantalum capacitor constant voltage filtering. Pcie3. 0 gen3 full speed design.
3. Cmstop
3 in 1 SSD Adapter Card Set PCI-E 3.0 to M.2 MVME B/M Key mSATA Hard Drive Adapter Card Solid State Disk Converter
Cmstop - When working with sata m. 2 to sata iii 6gbps and msata to sata iii 6gbps, a SATA cable is required to connect the motherboard. Supports pcie 2. 0, ?nvme m. 2 ssd to pci-e 3.
0x4 32gbps, m. 2 sata-based ssds, 3. 0, supports 3 ssds m. 2 pcie-based ssds, and msATA SSD to work simultaneously, and PCIe 4. 0 motherboard, no need to use SATA cable to connect to the PC. Supports pcie m. 2 ssd nvme or ahci, supports msata, apply to 2280/2260/2242/2230mm, apply to 2280/2260/2242/2230mm, pcie 3.0
0 x4 32 gbps bandwidth, supports SATA-based M. 2 ssd key-b / b + m, key-m, 30x50mm, sata 6 gbps bandwidth, SATA 6 Gbps bandwidth. It is compatible with pci-e 4x, 16x, but the speed only pCI-E 4X, 8X, 3-channel SSD read/write LED indicator. Supports for ios, for Wlndows8/10, for Linux, etc. The product already contains 2 SATA cables.
4. Cmstop
SSD Adapter Card PCIE 3.0 to M.2 NVME M KEY SSD Hard Disk Expansion Card for PCI Express X4/X8/X16 Motherboard
Cmstop - Compliance with pci express specification vision 3. 0, backward compatible with PCIe V2. 0 and V1. 0 motherboards. The m-key interface can be plugged into the ssd of the M. 2 pci-e protocol and can be connected to the motherboard without access to SATA cable for data transmission.
M. 2 pcie ssd obtains power from motherboard PCIe Bus slot 3. 3v. Supports pci express v3. 0x4 /x8/x16 channel transmission bandwidth up to 32GT/S. Through this adaptor can system running speed, office and entertainment efficiency. Supports nvme key m m. 2 ssd, 2260, including 2230, 2242, 2280 and 22110 drives.
5. Cmstop
M.2 NVME to PCI-E 3.0 X4 High Speed Expansion Card NVME PCIE Adapter Add On Cards M.2 NGFF M Key SSD Adapter
Cmstop - M key m. 2 ngff ssd to pci-e x4 adapter or b key?m. 2 ngff ssd to satA adapter. The rate and other properties is not changed, only change the interface type and without any software or drivers.
Support size: 22*30 mm, 22*60 mm, 22*42 mm, 22*80 mm M.2 ngff ssd. Compatible with any operating system On the premise of operating system must be compatible with your hard disk. Macth with two kinds of Metal sheet length: 8 cm, 12 cm.
6. Annadue
Annadue SSD SATA to PCI Host Controller Expansion Card, 2 Port NGFF M.2 B M Key to PCI-E 4X Adapter Card, for All OS, with Low Profile Bracket
Annadue - Easy installation & no driver required, and no additional power required, PCI-E power supply. Adopting 12v + 3. 3v dual voltage, faster, with led status indicator, more stable than a single voltage, can effectively reduce the SSD temperature.
Compliant with pci express m. 2 specification 1. 0, satA 3. 0 specification for B key, and PCI-E 4X 3.
0 specification for M key. Supports sata-based b key and pci-e 4x-based m key ngff ssd, 2242, 2260, 2280, and 2230, 22110 size NGFF SSD. Calorific value small, more convenient to use. Connect one b key & one m key ngff sSD to PCI-E 4X motherboard at the same time.
| Brand | Annadue |
| Manufacturer | Annadue |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.12 kg (0.27 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Annadue45xeg0m6gy |
7. Cmstop
PCIE SSD PCl-E X16 to 4 NVMe Solid State Drive Enclosure Adapter 4 Ports M.2 Computer Slot PLX8747 Expansion Array Card
Cmstop - No driver is required because the driver is transparent to the operating system. Compliant with pci express specification revision v3. 0, pci power management specification revision 1. 2, onboard with active cooling FAN M. 2 specification revision 09.
Supports nvme, support for 4-port ×4 lane m. 2 key m nvme ssd device, supports M. 2 "m" key and "b+m" key with PCl-E protocol. Automatic detection of lane configuration on boot-up, all ports support hot-plug, surprise removes, support ECRC. Backward compatible with pci-e 2. 0, pci-e 1. 0, and pcl-E 1. 0a.
8. Cmstop
M.2 Hard Disk NVME Convert Adapter Card PCIE to M.2 NGFF Raiser Test Card SSD Hard Disk Reader
Cmstop - Windows 7 and pe systems do not support SSDs with NVE protocol because they do not have NVME drivers. The installation of system must use the original windows 10 installation disk. This adapter is to convert m.
2 ngff ssd with pcie x4/ pcie x2 slot to pcie x1 slot of motherboard in PC, mainly used for the batch testing of firmware upgrading of SSD, or for emergency use when PCIe x4 some motherboards come with is not enough.
This product is inserted into the pcie x4 3. 0, pcie x8 3. 0 or pcie x16 3. 0 slot of the motherboard, namely the graphics card slot of the motherboard. This adapter card only supports ssd with m.
2 ngff interface transmitted by pcie x4 protocol SSD with only one gap and by PCIe x2 protocol SSD with two gaps. This adapter card is from interface to interface, does not pass through any chip, and has no influence on the performance of the hard disk. Do not wrongly insert it into the PCI slot, as it may burn the adapter card and the motherboard.
9. Pomya
Adapter Card PCI-E Riser Desktop PCI-E to M.2 SSD Expansion Card SATA3.0 Solid State Drive Riser Card Adapter
Pomya - Support port multiplication, support hot swap, and support long and short sheet iron. Mix small-capacity and high-performance M. 2sata ssds with low-cost and high-capacity mechanical hard drives to improve system.
Supports sataiii maximum transfer rate of NCQ 6. 0gbps. Maximum transmission rate is 6gbps, SATAII, compatible with SATAI, SATAIII hard drives. Support ngff m. 2 card size of 22x30, 22x60, 22x42, 22x80; support NGEE M.2 b key type.
| Brand | Pomya |
| Manufacturer | Pomya |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.04 kg (0.09 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Pomya2fr0y6tn9z |
10. Vipxyc
Vipxyc 2 Ports NGFF M.2 B + M Key To PCI-E 4X 3.0 Adapter Card SSD To PCI Express,Easy installation & no driver required
Vipxyc - Compliant with pci express m. 2 specification 1. 0 compliant with SATA 3. 0 specification for B key. Connects one b key & one m key ngff SSD at the same time to PCI-E 4X motherboard. One ngff b key and one ngff m key sockets available 8 screw holes 2230/2242/2260/2280 available to fix NGFF SSD cards.
Supports sata-based b key and pci-e 4x-based m key ngff ssd supports 2230, 2242, 2260 & 2280 size NGFF SSD. Compliant with pci-e 4x 3. 0 specification for M key Supports data transfer up to 6. 0gb/s.
| Brand | Vipxyc |
| Manufacturer | Vipxyc |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.11 kg (0.25 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Vipxycvrtiyezgqs |
Vipxyc - Supports 2230, 2242, 2260, 2280, 22110 size ngff ssd. Pci-e power supply. One ngff b key and one ngff m key sockets available. Calorific value small, more convenient to use.
Cmstop - Easy to install, no driver is required. Integrated btbcOIN high-speed signal enhancement technology. Not stuck, the motherboard self-test does not delay. With large capacity tantalum capacitor constant voltage filtering. Pcie3. 0 gen3 full speed design.
Cmstop - When working with sata m. 2 to sata iii 6gbps and msata to sata iii 6gbps, a SATA cable is required to connect the motherboard. Supports pcie 2. 0, ?nvme m. 2 ssd to pci-e 3.
Cmstop - Compliance with pci express specification vision 3. 0, backward compatible with PCIe V2. 0 and V1. 0 motherboards. The m-key interface can be plugged into the ssd of the M. 2 pci-e protocol and can be connected to the motherboard without access to SATA cable for data transmission. M. 2 pcie ssd obtains power from motherboard PCIe Bus slot 3. 3v. Supports pci express v3. 0x4 /x8/x16 channel transmission bandwidth up to 32GT/S. Through this adaptor can system running speed, office and entertainment efficiency. Supports nvme key m m. 2 ssd, 2260, including 2230, 2242, 2280 and 22110 drives.
Cmstop - M key m. 2 ngff ssd to pci-e x4 adapter or b key?m. 2 ngff ssd to satA adapter. The rate and other properties is not changed, only change the interface type and without any software or drivers. Support size: 22*30 mm, 22*60 mm, 22*42 mm, 22*80 mm M.2 ngff ssd. Compatible with any operating system On the premise of operating system must be compatible with your hard disk. Macth with two kinds of Metal sheet length: 8 cm, 12 cm.
Annadue - Easy installation & no driver required, and no additional power required, PCI-E power supply. Adopting 12v + 3. 3v dual voltage, faster, with led status indicator, more stable than a single voltage, can effectively reduce the SSD temperature.
Cmstop - No driver is required because the driver is transparent to the operating system. Compliant with pci express specification revision v3. 0, pci power management specification revision 1. 2, onboard with active cooling FAN M. 2 specification revision 09. Supports nvme, support for 4-port ×4 lane m. 2 key m nvme ssd device, supports M. 2 "m" key and "b+m" key with PCl-E protocol. Automatic detection of lane configuration on boot-up, all ports support hot-plug, surprise removes, support ECRC. Backward compatible with pci-e 2. 0, pci-e 1. 0, and pcl-E 1. 0a.
Cmstop - Windows 7 and pe systems do not support SSDs with NVE protocol because they do not have NVME drivers. The installation of system must use the original windows 10 installation disk. This adapter is to convert m.
Pomya - Support port multiplication, support hot swap, and support long and short sheet iron. Mix small-capacity and high-performance M. 2sata ssds with low-cost and high-capacity mechanical hard drives to improve system. Supports sataiii maximum transfer rate of NCQ 6. 0gbps. Maximum transmission rate is 6gbps, SATAII, compatible with SATAI, SATAIII hard drives. Support ngff m. 2 card size of 22x30, 22x60, 22x42, 22x80; support NGEE M.2 b key type.
Vipxyc - Compliant with pci express m. 2 specification 1. 0 compliant with SATA 3. 0 specification for B key. Connects one b key & one m key ngff SSD at the same time to PCI-E 4X motherboard. One ngff b key and one ngff m key sockets available 8 screw holes 2230/2242/2260/2280 available to fix NGFF SSD cards. Supports sata-based b key and pci-e 4x-based m key ngff ssd supports 2230, 2242, 2260 & 2280 size NGFF SSD. Compliant with pci-e 4x 3. 0 specification for M key Supports data transfer up to 6. 0gb/s.
