As an Amazon Associate I earn from qualifying purchases.1. BeiLan
BeiLan 32V Low Profile Add-a-Circuit Fuse Tap, 4pcs ACN Micro Piggy Back Blade Fuse Holder with Wire Harness, 6pcs Fuse 3A 5A 7.5A 10A 15A 20A and 1pcs Fuse Puller
BeiLan - Easy to use: 1. Simply remove an existing fuse from the fuse box, insert that fuse in to the bottom slot of the fuse tap. Turns one fuse slot into two-plugs into any fuse slot, even if the slot has a fuse installed, this could provides protection for both circuits, the existing circuits are not affected.
Premium quality: the 16awg wire lead is made of good quality ABS & copper wire.
Micro blade fuses and stand up to 20 AMP each slot, protects original circuit and provides a lead For new circuit. Package included: 6pcs micro fuse 3a 5a 7. 5a 10a 15a 20a, 4pcs 16cm fuse holder, and 1pc fuse puller. 2. Insert a suitable fuse for the new accessory in to the top slot. 3. Crimp your new live wire to the transparent butt terminal on the fuse tap.
2. Connect Workshop Consumables
Connect Workshop Consumables 37189 Add-a-Circuit Blade Fuse Holder for Micro 2 Blade Fuse
Connect Workshop Consumables - Pack 1. Supplied in a folding blister. Compatible wiring 14 - 16 AWG. Max current 10 amps. To be used with Micro 2 Blade fuses.
3. Connect Workshop Consumables
Connect Workshop Consumables 37159 Micro 2 Blade Fuse Assorted Box 63 Pc
Connect Workshop Consumables - Housing : pA66 Thermoplastic. Contains - 5amp, 15amp, 20amp, 25amp, 10amp, 30amp x 10 Pieces of each. Supplied in a plastic box with hanging hook. Contains - 2 x add a circuit Fuse Holder & Fuse Puller. Micro 2 Blade Fuses.
4. Bolatus
8 Set Circuit Fuse Tap, Bolatus Small Add-A-Circuit Fuse Tap Piggy Back ACS Car Fuses Universal Ato Atc Fuse Holder Box 12V 24V with 20A Blade Fuse Wire and Fuse Puller…
Bolatus - Widely applicablethis inline fuse holder mainly used for adding a circuit based on the original car circuit, radar detector, so that it can power supply for driving recorder, electronic dog, GPS, car audio, LED and other Automotive electronics.
2. Insert a suitable fuse for the new accessory in to the top slot. Practical safeprotects original circuit and provides a lead for new circuit. The automotive fuses turns one slot into two slots, provides one fuse holder to protect existing circuit, and a second fuse piggyback holder to protect new circuit.
Easy installation1. Simply remove an existing fuse from the fuse box, insert that fuse in to the bottom slot of the fuse tap.
Package included8 pcs small fuse holders, 8 Pcs 20A blade fuses and 1 Pcs fuse puller. Premium materialpiggyback fuse made of good quality ABS and copper wire for corrosion resistance and enhanced conductivity, protect your vehicles and your electrical device from a short circuit and overload. 3. Crimp your new live wire to the transparent butt terminal on the fuse tap.
5. VIOFO
VIOFO 4PCS Circuit Fuse Tap ATC ATS MICRO2 MINI Adapter Holder
VIOFO - Please note that this package includes one piece ATC fuse, one piece ATS fuse, one piece MICRO2 fuse, one piece MINI fuse.
| Brand | VIOFO |
| Manufacturer | VIOFO |
| Part Number | Fuse_Tap_Adapter_4 |
6. MagiDeal
MagiDeal Blade Style ATR APT Micro 2 Fuse Tap Holder With 5AMP Fuse Circuit Adapter
MagiDeal - Applications: car led, engine block heaters, car Black Box, Car locators, GPS, dvd players, satellite radio, Car Remote Starters, alarms, Cell Phone Charger. Quick and easy installation of additional 12V accessories without cutting wires.
Protects old circuit and provides a wire lead for the new circuit. Plugs into an existing fuse holder. Used in new vehicles and limited space. Comes with a 5 AMP Fuse. For use with atr/apt MICRO2 blade fuses.
7. Desenda
4 Pieces Circuit Fuse Tap Piggy Back Mini Blade Car Ato Atc Fuse Holder Box 12V 24V with 10A Circuit Mini Blade, Mini Fuse Holder
Desenda - Simply remove an existing fuse from the fuse box, insert that fuse in to the bottom slot of the fuse tap. Crimp your new live wire to the blue butt terminal on the fuse tap.
3. Includes 4 sets 10A Mini Blades and Fuse Holders. Easy instra installation: 1. 2. Insert a suitable fuse for the new accessory in to the top slot. Rated 10a 12v/24v DC.
| Brand | Desenda |
| Manufacturer | Desenda |
| Part Number | Dzs-PH-2200077 |
| Model | Dzs-PH-2200077 |
8. Quacc
Quacc 4 x Circuit Fuse Tap Universal Piggy Back Mini Blade Ato Atc Fuse Holder Box 12V 24V with 10A Circuit Mini Blade
Quacc - 2. Esay instra installation: 1. Crimp your new live wire to the blue butt terminal on the fuse tap. You can use your blades if 10A can not meet your needs. Secure and safe. Insert a suitable fuse for the new accessory in to the top slot.
Simply remove an existing fuse from the fuse box, for the secure and safe purpose, insert that fuse in to the bottom slot of the fuse tap. 3. Max capacity of fuse holders up to 20A. Material: aBS & copper wire. Includes 4x blades and 4x 10a fuse holders. Rated 10a 12v/24v DC. During installing, fuses may a bit tight to fit.
9. KOLACEN
KOLACEN Automotive Car Truck 2 Pieces 16 Gauge Add-a-circuit Fuse TAP Adapter for Low-profile Mini Blade Type Fuse + 8 Pieces Low Profile Mini Fuse 5Apm 7.5Apm 10Apm 15Apm
KOLACEN - Mainly used in the car original circuit to add new circuit, easy to install, without damage to the original car circuit. 2 pcs 16 awg gauge auto add-a-circuit fuse tap adapter, suitable for low profile mini fuses.
8 pcs car low profile mini fuse 5A 7. 5a 10a 15a, each has 2pcs. Voltage rating: less than 32V DC, Rated current: less than 15A. High quality material, ROHS compliant, wire length: 15cm.
10. GTIWUNG
GTIWUNG 32V Car Fuse Tap, Standard Fuse Tap, Medium Piggy Back Blade Fuse Holder with Wire HarnessPack of 6, Add-a-Circuit Fuse Adapter
GTIWUNG - High quality material: using copper plug and copper wire, the electronic conductivity is better. What's more, it can avoid electric shock.
The material of this fuse tap is PVC, which has good mechanical performance. Easy to install: this add a circuit or fuse kit allows easy installation of additional circuits without cutting or spicing.
Widely applicable: this product is mainly used for adding a circuit based on the original car circuit, so that it can power supply for driving recorder, radar detector, GPS, electronic dog, car audio, LED and other Automotive electronics. Product name: Standard add-a-circuit fuse tap. Plug set: with plug set, it is easier to wire cable.
| Brand | GTIWUNG |
| Manufacturer | GTIWUNG |
| Height | 0.39 |
| Length | 8.66 |
| Width | 4.72 |
| Part Number | T098 |
BeiLan - Easy to use: 1. Simply remove an existing fuse from the fuse box, insert that fuse in to the bottom slot of the fuse tap. Turns one fuse slot into two-plugs into any fuse slot, even if the slot has a fuse installed, this could provides protection for both circuits, the existing circuits are not affected.
Connect Workshop Consumables - Pack 1. Supplied in a folding blister. Compatible wiring 14 - 16 AWG. Max current 10 amps. To be used with Micro 2 Blade fuses.
Connect Workshop Consumables - Housing : pA66 Thermoplastic. Contains - 5amp, 15amp, 20amp, 25amp, 10amp, 30amp x 10 Pieces of each. Supplied in a plastic box with hanging hook. Contains - 2 x add a circuit Fuse Holder & Fuse Puller. Micro 2 Blade Fuses.
Bolatus - Widely applicablethis inline fuse holder mainly used for adding a circuit based on the original car circuit, radar detector, so that it can power supply for driving recorder, electronic dog, GPS, car audio, LED and other Automotive electronics.
VIOFO - Please note that this package includes one piece ATC fuse, one piece ATS fuse, one piece MICRO2 fuse, one piece MINI fuse.
MagiDeal - Applications: car led, engine block heaters, car Black Box, Car locators, GPS, dvd players, satellite radio, Car Remote Starters, alarms, Cell Phone Charger. Quick and easy installation of additional 12V accessories without cutting wires. Protects old circuit and provides a wire lead for the new circuit. Plugs into an existing fuse holder. Used in new vehicles and limited space. Comes with a 5 AMP Fuse. For use with atr/apt MICRO2 blade fuses.
Desenda - Simply remove an existing fuse from the fuse box, insert that fuse in to the bottom slot of the fuse tap. Crimp your new live wire to the blue butt terminal on the fuse tap. 3. Includes 4 sets 10A Mini Blades and Fuse Holders. Easy instra installation: 1. 2. Insert a suitable fuse for the new accessory in to the top slot. Rated 10a 12v/24v DC.
Quacc - 2. Esay instra installation: 1. Crimp your new live wire to the blue butt terminal on the fuse tap. You can use your blades if 10A can not meet your needs. Secure and safe. Insert a suitable fuse for the new accessory in to the top slot. Simply remove an existing fuse from the fuse box, for the secure and safe purpose, insert that fuse in to the bottom slot of the fuse tap. 3. Max capacity of fuse holders up to 20A. Material: aBS & copper wire. Includes 4x blades and 4x 10a fuse holders. Rated 10a 12v/24v DC. During installing, fuses may a bit tight to fit.
KOLACEN - Mainly used in the car original circuit to add new circuit, easy to install, without damage to the original car circuit. 2 pcs 16 awg gauge auto add-a-circuit fuse tap adapter, suitable for low profile mini fuses. 8 pcs car low profile mini fuse 5A 7. 5a 10a 15a, each has 2pcs. Voltage rating: less than 32V DC, Rated current: less than 15A. High quality material, ROHS compliant, wire length: 15cm.
GTIWUNG - High quality material: using copper plug and copper wire, the electronic conductivity is better. What's more, it can avoid electric shock.
